SawStop PCS175-PFA30 30" Premium Fence Assembly Professional Cabinet Saw

FEATURES / SPECIFICATIONS

 

More Information

Manufacturer	SawStop
Condition	New
Features	A safer, better saw, in so many ways. The SawStop® Professional Cabinet Saw has several features to help operators stay safe. SawStop safety system prevents serious injury with always-on protection. 110V, 1.75HP model is engineered for the home shop, as it delivers the convenience of plugging in anywhere and a smaller shop footprint combined with the Professional Cabinet Saw's safety, quality and dependability. Dust Collection Blade Guard (included with the 3.0HP model, optional for the 1.75HP model). This innovative blade guard collects above-table dust and features independent lateral sides to minimize exposure to the blade. It retains a low profile to allow for cuts as narrow as 3/4 of an inch. Riving knife minimizes kickback and provides protection during non-through cuts. We double-check the saw every time you turn it on. A diagnostic self-check runs when you start the saw to ensure all systems are ready to detect an accident. If any problem is detected, the system will not allow the saw to start. Sometimes you have your hands full and really need to stop the blade. Our large start/stop paddle with hands-free shutoff can be pushed with your knee allowing you to safely stop the blade even hands free. Never worry again about someone using your saw when you're not around. The main power switch with lockout key prevents unauthorized users from operating the saw. When the power goes out, the saw stays off. The safety system won't allow the motor to restart automatically when the power comes back on. Left-tilting blade helps prevent wood from binding against the fence.
Includes	2 x Cast Iron Extension Wings Miter Gauge Micro Blade Guard (1.75Hp Models) Dust Collection Blade Guard (3Hp Models) Riving Knife 2 x Blade Wrenches Push Stick 10” Blade Table Insert Standard Brake Cartridge 2 x Hardware Packs 3 mm Hex Key 5 mm Hex Key 8 mm Hex Key Blade Spacing Adjustment Gauge

Horsepower	1.75 HP
Motor Phase	1 Ph
Size (Inch)	10"
Warranty	SawStop warrants to the original retail purchaser of a new contractor saw from an authorized SawStop distributor that the saw will be free from defects in material and workmanship for ONE YEAR from the date of purchase. SawStop warrants to the origi

Rip Capacity	30"
Overall Saw Width	61-3/4"
Overall Saw Depth	31-1/8"
Overall Saw Height	34"
Voltage	120 V
Amperage	14 Amps
Saw Body Footprint Width	19-3/8"
Saw Body Footprint Depth	19-3/8"
Cast Iron Table Width	20"
Cast Iron Table Depth	27"
Extension Wings Width	12"
Extension Wings Depth	27"
Cast Iron Table (with Extension Wings) Width	44"
Cast Iron Table (with Extension Wings) Depth	27"
Extension Table Width	12"
Extension Table Depth	27"
Assembled Weight with 30" Fence Systems	367 lbs
Weight - Table Saw Only	317 lbs
Blade Arbor Size	5/8"
Blade Teeth Per Inch	40
Blade Tilt	Left
Blade Kerf	0.118"
Blade Plate Thickness	0.078"
Maximum Depth of Cut, Blade at 0 Deg	3-1/8"
Maximum Depth of Cut, Blade at 45 Deg	2-1/4"
Maximum Rip, Right of Blade	30" (with 30" Rails)
Maximum Rip, Left of Blade	12"
Dado Diameter	8" (Requires Dado Brake Cartridge & Insert)
Dado Maximum Width	13/16"
Arbor Diameter at Blade	5/8"
Main Bearing Outer Diameter	2-1/2"
Main Bearing Inner Diameter	1-1/8"
Second Bearing Outer Diameter	1"
Table in Front of Blade (Maximum Elevation)	10-1/4"
Table Behind Blade (Maximum Elevation)	7-1/2"
Arbor Runout	0.001" Maximum Allowable Runout
Table Flatness Measured Diagonally	0.010" Maximum Gap
Blade Alignment with Miter Slot	0.010" Maximum Displacement
Deviation of Miter Gauge Indexing Stops From Actual	±0.25 Deg
Alignment Between Splitter and Blade	0.010" Maximum Difference
Miter Slots T-Shaped Top	3/4"
Miter Slots T-Shaped Bottom	1"
Miter Slots T-Shaped Deep	3/8"
Miter Slots Center	11-1/8" Center-to-Center
Miter Slots Info	5-1/2" (Arbor Flange to Center of Right Slot)
Dust Collection Port Diameter	4"
Riving Knife / Splitter Thickness	0.090"
Dust Collection Blade Guard (Standard on 3 HP Saws)(Optional on 1.75 HP Saws)	Polycarbonate, Extends 1-3/16" Right of Blade
Blade Guard Outside	1-1/2"
Blade Guard Inside	1-1/4"
Insert	Zero Clearance, Phenolic Core, Melamine Surfaces
Micro Blade Guard (Standard on 1.75 HP Saws)	Polycarbonate, Extends 1" Right of Blade
Hand Wheels	7" Diameter, Cast Iron with Chrome Handle
Belts	2 V-Ribbed Belts - Arbor b. Static Dissipative