SawStop CNS175-SFA30 30" 120V CNS Contractor Saw, 1.75HP

FEATURES / SPECIFICATIONS

 

More Information

More Information Manufacturer SawStop Condition New Features Micro Blade Guard: Polycarbonate, extends 1 inch right of blade (opt dust guard for purchase) Insert: Zero clearance, phenolic core, melamine surfaces Includes 2 X Steel Extension Wings Miter Gauge Micro Blade Guard Riving Knife 2 x Blade Wrenches Push Stick 10” Blade Table Insert Standard Brake Cartridge Owner’S Manual Assembly Instructions 2 x Hardware Packs 3 mm Hex Key 5 mm Hex Key 8 mm Hex Key Blade Spacing Adjustment Gauge 30” Rip Capacity & Aluminum Extrusion Fence

Horsepower 1.75 HP Size (Inch) 10" Voltage 120 V Amperage 14 Amps Frequency 60 Hz Overall Saw Depth 40" Overall Saw Width 58-1/2" Overall Saw Height 34-3/4" Saw Body with Stand Footprint Depth 27" Saw Body with Stand Footprint Width 25-3/4" Cast Iron Table Depth 27" Cast Iron Table Width 20" Cast iron Table Depth (with Extension Wings) 27" Cast iron Table Width (with Extension Wings) 44" Stamped Steel Wings Depth 27″ Stamped Steel Wings Width 12″ Assembled Weights - with 30" Fence Systems 245 lbs Weights - Table Saw Only 225 lbs Weights - (Optional Cast Iron Wings) 35 lbs Teeth Per Inch 40 Arbore Size 5/8" Blade Tilt Left Blade Kerf 0.118" Blade Plate Thickness 0.078" Maximum Depth of Cutting Blade at 0 Deg 3-1/8" Maximum Depth of Cutting Blade at 45 Deg 2-1/4" Maximum Rip Left of Blade 16-1/2" Dado Diameter 8" (Req. Dado Brake + Insert) Dado Maximum Width 13/16" Arbor Diameter at Blade 5/8″ Main Bearing Inner Diameter 1-1/8" Main Bearing Outer Diameter 2-1/2" Second Bearing Inner Diameter 1" Second Bearing Outer Diameter 2" Table in Front of Blade (Maximum Elevation) 10-5/8" Table Behind Blade (Maximum Elevation) 7-1/8" Arbor Runout 0.001″ Maximum Allowable Runout Table Flatness Measured Diagonally 0.016″ Maximum Gap Blade Alignment with Miter Slot 0.010″ Maximum Displacement Deviation of Miter Gauge Indexing Stops From Actual ±0.25 Deg Alignment Between Splitter and Blade 0.010" Maximum Difference Miter Slots T-Shaped at Top 3/4" Miter Slots T-Shaped at Bottom 1" Miter Slots T-Shaped at Deep 3/8" Miter Slots Center 11-1/8" Center-to-Center Miter Slots Info 5 1/2" (Arbor Flange to Center of Right Slot) Dust Collection Port Diameter 4" Under Table Top Riving Knife / Splitter Thickness 0.090" Hand Wheels 6″ Diameter, Cast Alum. with ABS Handle Belts V-Ribbed Belt – Static Dissipative