63134998300, Fein 1-1/4" Pilot Pin for JHM Mag Drills

The Pilot Pin plays a very important role in the effectiveness of your Slugger Annular Cutter. The pilot pin aligns the Slugger cutters to the desired drilling position. It also ejects the slug from the center after the drilling is complete.

Features:

• The pilot pin allows coolant to flow to the center of the cutter during the drilling cycle
• It gives you your alignment for your desired drilling position
• The pilot pin ejects the slug from the center of the cutter after the drilling cycle is complete
• Allows you to easily see the center of the hole you are going to create

• Pilot Pin 16003
• 1 in. depth of cut
• 9/16 in. diameter or smaller