HAMMER DRILL1/2 MAGNUM KIT MILWAUKEE 5371-21

$197.06
MILW5371-21

For small hole drilling up to 1/2 inch the MILWAUKEE Magnum® Hammer-Drill is all the tool you'll need. Lightweight at 5-3/4 pounds, this tool is ideal for use overhead. With two modes of operation, rotation with hammering and rotation only, this versatile tool can be used for drilling in steel, wood or concrete. Use rotation only for drilling in steel and wood. Use rotation with hammering when drilling in concrete. Dual range speed control allows the operator to choose higher speed with lower torque or slower speed and more torque depending on the size and type of the fastener or bit and the material being drilled. This tool can be used to drive concrete screw fasteners used in many installation operations. The Hammer-Drill offers a unique brush cartridge system, storing spare carbon brushes in the handle of the tool. Only a screwdriver is needed to replace worn brushes. The tool is back on the job in minutes. FEATURES   1/2 inch capacity, 5.5 amp motor Trigger speed control in two ranges: 0-1000 rpm, 0-20,000 bpm, 0-2500 rpm, 0-50,000 bpm, reversing Removable brush cartridge - change brushes in less than one minute

SPECIFICATIONS

•   Voltage 120 AC
•   Amps 5.5
•   No Load Speed 0-1,000/0-2,500 RPM
•   No Load BPM 0-20,000/0-50,000
•   Chuck Type Keyed
•   Cord Type 8 ft.
•   Fixed Trigger Lock On
•   Capacity in Steel 1/2 in.
•   Capacity in Concrete 5/8 in./1/2 in.
•   Selfeed Bit Capacity 1-1/8 in.
•   Length 13 in.
•   Tool Weight 5.8 lbs.
•   Shipping Weight 11.8 lbs.

INCLUDES 

•    Carrying Case
•  Depth Gauge
•  Side Handle
•   Chuck Key with Holder 
•   Jobber Twist Bit Set for drilling holes in wood and steel 
•   Hex Shank Bit Set for drilling holes in concrete