DRILL MAG PRESS SMALL W/CASE

$914.71
MILW4270-21

For remote drilling in metal, the 4270 is a great choice. The entire tool weighs just 26-1/2 pounds and has a comfortable carrying handle well positioned for balance, with cutter wrenches stored on-board. This is a very portable machine. However, power was not sacrificed for portability. This drill press includes a very powerful 1.1 maximum horsepower, 9.0 amp motor. It can drill up to 1-1/2 in. diameter holes through 2 in. thick steel with annular cutters, or 1/2 in. diameter holes 4-1/4 in. deep with twist drill bits. The tool is setup to accept standard 3/4 in. Weldon shank cutters, or an optional 3-jaw chuck is available for use with twist drill bits. The strong two-coil magnet provides 2,300 lbs. of deadlift force on 1 in. thick steel. The simple two-button control panel is located on the back, away from feed handle obstruction. The feed handle can be conveniently relocated to the opposite side without the use of tools. FEATURES   Powerful 9.0 amp 1.1 max HP motor  Light weight, only 26.5 lbs. with comfortable carrying handle   Capacity to cut up to 1-1/2 in. diameter holes thru 2 in. steel with annular cutters, or 1/2 in. diameter holes, 4-1/4 in. deep with twist drill bits   Strong two-coil magnet   Two positions for feed handle - relocate without tools   Simple two-button control panel - unobstructed by feed handle SPECIFICATIONS   Voltage  120 AC  Amps  9.0  Drill Capacity  1/2 in.  No Load Speed  450 RPM  Cord Type  8 ft. Fixed  Construction Type  Grounded  Electronic Feedback  Yes  Tap Capacity  --  Drill Point Pressure  750 lbs.  Adjustable Base  No  Drill Travel  6.6 in.  Chuck or Taper  Weldon  Tool Weight  26.5 lbs.  Shipping Weight  46.0 lbs. INCLUDES    Lubricant Spray Bottle  Nylon Safety Strap  Two Hex Wrenches