RC-63D 24-3/4” x 9-3/8” PLANER

$18,433.00 $10,364.00 On Sale!
DEL22-610

RC-63D 24 3/4" X 9 3/8" Planer Model 22-610 Delta Indusrial Model 22-610 RC-63D 24 3/4" X 9 3/8" Planer with a 10HP, 200-220/440V (wired 220V), 60 Hz., three-phase motor with 24-volt LVC magnetic starter and automatic reset overload; standard 4-knife cutterhead; set of four case hardened, high-speed steel knives and knife setting gage. • Power-driven table raises and lowers simply and quickly. Fine adjustments are made using the convenient hand wheel.• Lumber gauge enables operator to measure stock thickness quickly.• Rear pressure bar maintains even force on planed stock; outfeed roll helps maintain positive feeding under all conditions.• Efficient, fully accessible drive system makes it easy to change feed speed by simply move V-belt from one pulley step to the other.• Standard equipment dust chute has a 6" opening for easy connection to a central dust collection system.• Outfeed roll is driven through feed gear box and supplies power to the infeed roll and table raising and lowering gear box mechanism. Heavy duty chains and sprockets are used throughout the system.• Complete cutterhead and feed group are modulary mounted to the machine frame, including seperate bearing blocks for cutterhead. This allows the entire cutterhead to be removed without disturbing feed system settings. System also includes twelve 2" wide sectional chip breakers for full width, even pressure on wide, tapered stock. Full width anti-kickbacks provide added safety.• Spacious table raises and lowers on four precision, self-locking screws. Solid steel gibs keep table in perfect alignment regardless of thickness of cut. Dust-proof rubber boots protect screws from abrasive dust and moisture.• Large 24" X 35 1/2" precision-ground table is equipped with two adjustable bed rolls located directly below feed rolls for smooth, positive feeding. Bed roll height can be quickly adjusted from the front of the machine to suit variations in planing condidtions.  Motor• 10 HPFEED ROLLS• Spiral in-feed: 2.75" dia.(70 mm)• Outfeed: 2.75" dia.(70 mm), adjustable• Table bed rolls (2): adjustableTABLE SIZE• 24 3/4" X 35 1/2"(629 X 902 mm)TABLE RISE AND FALL• power driven fine adjustment by handwheelCHIP CHUTE OPENING• 6"(152 mm)OVERALL DIMENSIONS• Height: 42 1/8"(1070 mm)• Width: 43"(1092 mm)• Depth: 37 1/2"(953 mm)WEIGHT• 1675 lbs.(760 kg.)Max. Width of Stock (in.)• 24.8 Feed Rate (ft./min.)• 25/46MOTOR (RC-63D)L• 10HP, 200, 220/440V (wired 220V), three-phaseCONTROLS• 24-volt, low voltage controlCAPACITIES• Max. width of stock: 24.8"(630 mm)• Max. thickness of stock: 9.38"(238 mm)• Min. thickness of stock: 1/8"(3 mm)DEPTH OF CUT• Maximum .39"(10 mm)• Full width planing: 1/8"(3 mm)• Min. length of stock: 11"(279 mm)FEED RATES• 25/46 FMP (7.6/14 MPM.)CUTTERHEAD• Standard knife: 4• Diameter:4.72"(120 mm)• Speed: 5000 rpm