Dependable Heavy-Duty, Inspectable Wedge Type Expansion Anchor SPECIFIED FOR ANCHORAGE INTO CONCRETE Wedge anchors feature a type 18-8 stainless steel split expansion ring and a threaded stud bolt body and integral cone expander, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations. The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification. Use carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994 to install anchors. Anchors tested to ASTM E488 criteria and listed by ICBO and SBCCI. Anchors are listed by the following agencies as required by the local building code: UL, FM, City of Los Angeles, California State Fire Marshal and Cal Trans. ADVANTAGES Versatile fully threaded design is standard on sizes up to 3/4" diameter and 7" length Anchor diameter equals hole diameter One piece stainless steel expander clip resists corrosion 360° contact with concrete assures full expansion for reliable working loads Non bottom-bearing, may be used in hole depth exceeding anchor length Can be installed through the work fixture, eliminating hole spotting Inspectable torque values, indicating proper installation.
